Ricoh GR IIIx accessories
Three things decide almost every accessory question on a GR, and all three changed across the range:
- Lens adapter: Lens Adapter GA-2 — carries 49mm filters
- Battery: DB-110
- Card: Full-size SD / SDHC / SDXC card
Lens adapter
- Lens Adapter GA-2officialconfirmed fit
- Ricoh states plainly: "GA-2 cannot be used on the GR III."
- Required to mount the GT-2 tele conversion lens on the GR IIIx.
Compare every option across the range →
Filters
- Any 49mm screw-in filter (ND, UV, CPL, black mist)confirmed fit
- Every GR back to the GR II takes ordinary 49mm filters — but only through the adapter, and the adapter is model-specific. Get the adapter right and any 49mm filter works.
- Adhesive stick-on filters are widely reported to pull the front lens panel off when removed. Owners have needed the panel reattached.
- The GR IV and GR IIIx HDF have a built-in highlight diffusion filter; adding a mist filter on top is usually redundant.
Compare every option across the range →
Battery
- Rechargeable Li-ion Battery DB-110officialconfirmed fit
- Does not fit the GR IV or GR IVx, which use the DB-120.
- Third-party cells are common and cheap; several owners report swelling and early failure with off-brand batteries.
Compare every option across the range →
Charger
- Battery Charger BJ-11official
- Charges the DB-110 over USB. The camera also charges in-body over USB-C.
Compare every option across the range →
Memory card
- Full-size SD / SDHC / SDXC card (UHS-I)confirmed fit
- The GR III and GR IIIx take full-size SD. The GR IV and GR IVx take microSD — your cards do not carry over.
- Both are UHS-I. A faster card gains nothing.
- Internal memory is about 2GB, so you need a card.
Compare every option across the range →
Conversion lens
- Tele Conversion Lens GT-2officialconfirmed fit
- Roughly 75mm equivalent. Requires the GA-2 adapter, which is GR IIIx only.
Compare every option across the range →
Viewfinder
- External Viewfinder GV-1official
- Optical, about 90% coverage, with 21mm and 28mm frame lines — so it suits the 28mm bodies, not the 40mm GR IIIx.
- A conversion lens or hood intrudes into the view.
- External Mini Viewfinder GV-2official
- About 85% coverage with a 28mm frame line and a 1:1 marking. Suits 28mm bodies.
- External Mini Viewfinder GV-3official
- About 85% coverage with a 40mm frame line — the one that matches the GR IIIx.
- Listed on the shared GR III/GR IIIx accessory page; the 40mm frame is only useful on a 40mm body.
Compare every option across the range →
Flash
- External Flash GF-2official
- Guide number 3 (ISO 100, m) — small, for fill rather than power.
- On the GR III and GR IIIx a firmware update is required before the GF-2 will work.
- Built-in battery, charged over USB-C.
Compare every option across the range →
Case
- Soft Case GC-11official
- Leather, top cover with magnet closure, belt loop. Listed for both generations.
- Soft Case GC-12official
- Soft leather pouch that folds flat when not in use. Listed for both generations.
Compare every option across the range →
Strap
- Hand Strap GS-2official
- Single-point leather hand strap.
- Neck Strap GS-3official
- Two-point leather neck strap.
Compare every option across the range →
Thumb grip
- Thumb grip (third-party only)
- Ricoh does not make one. Every option is third-party and slots into the hot shoe.
- It occupies the hot shoe, so you cannot use a thumb grip and the GF-2 flash at the same time.
- Grips are cut for a specific body. A GR III grip does not necessarily sit flush on a GR IV.
Compare every option across the range →
Lens hood
- Lens hood (third-party only)
- Ricoh lists no standalone hood; the one it does supply comes bundled with the GW-4 conversion lens.
- Third-party hoods mount on the lens adapter, so you need the correct adapter for your body first.
- A hood intrudes into the view of the GV-1 and GV-2 optical finders.
- A hood makes the camera no longer pocketable, which is most of the point of a GR.
Compare every option across the range →
Screen protector
- Screen protector (third-party only)
- No official Ricoh option exists.
- All current GR bodies use a 3.0-inch touchscreen, but cutouts and edge radius differ — buy one cut for your exact model.
- The screen is touch-sensitive; a thick protector can degrade touch response.
Compare every option across the range →
Do not buy these for a Ricoh GR IIIx
These are official Ricoh parts that fit a different GR. The naming is close enough that this is the most common way to waste money on this camera.
- Battery Charger BJ-12 — fits Ricoh GR IV.
- Battery Charger BJ-6 — fits Ricoh GR II.
- Rechargeable Li-ion Battery DB-120 — fits Ricoh GR IV, Ricoh GR IVx.
- Rechargeable Battery DB-65 — fits Ricoh GR II.
- Lens Adapter GA-1 — fits Ricoh GR III.
- Lens Adapter GA-3 — fits Ricoh GR IV.
- Hood and Adapter GH-3 — fits Ricoh GR II.
- Wide Conversion Lens GW-3 — fits Ricoh GR II.
- Wide Conversion Lens GW-4 — fits Ricoh GR III, Ricoh GR IV.
Check any part against any body
Sources
Confirmed against a primary/manufacturer source.
Last verified .
- https://www.ricoh-imaging.co.jp/english/products/gr-3/accessories/
- https://www.ricoh-imaging.co.jp/english/products/gr-4/accessories/
- https://www.ricoh-imaging.co.jp/english/products/gr-3/feature/03.html
- https://us.ricoh-imaging.com/product/tele-conversion-lens-gt-2/
- https://www.ricoh-imaging.co.jp/english/products/gr-4/spec/
- https://us.ricoh-imaging.com/ricoh-imaging-announces-ricoh-gr-ivx-currently-under-development/